Pair Cordless phone with Base
1. From the Home screen, press the OK button.
2. Navigate to Settings.
3. Select Settings.
4. Navigate to Registration.
5. Select Registration.
6. Select Register Handset.
7. Select Base1.
8. While the handset is searching, press and hold the WPS button on your base station until the device button starts blinking.
9. Press the OK button to confirm the correct base station.
10. Enter your PIN.
Default Pin is 0000
11. Press the Done button.
12. You’ve completed the steps!
Related Articles
Factory Reset your Verizon phone.
Warning This operation will delete all your personal configuration settings, and reset all settings to the factory defaults. Check with your system administrator if the personalized settings are kept before resetting your phone to factory set- tings. ...One Talk Desk Phone - Use Paging Key
One Talk Desk Phone - Use Paging Key Notes: Page broadcasts are played on the speakerphone of any desk phones that are in 'idle' state. Page broadcasts are not played on the speakerphone if the desk phone receiving the page is in DND mode. Pages are ...One Talk Desk Phone - Enable / Disable Paging
One Talk Desk Phone - Enable / Disable Paging Notes: Paging is a device-level feature available for compatible One Talk Desk Phone models. The feature is enabled by the end-user on each Desk Phone as opposed to a setting in the One Talk portal. Once ...Retrieve Voicemail from Another Phone or While Roaming
Retrieve Voicemail from Another Phone or While Roaming Dial your 10-digit mobile number. for OneTalk you can use Extension numbers if calling from another OneTalk Phone on the same account. If dialing from an international location, refer to Place an ...Problems with your Verizon phone not ringing
Problems with your Verizon phone not ringing but able to make calls. If your line goes Straight to voicemail This could mean 1 of 2 things. Do not Disturb is turned on Either Do Not Disturb(DND) is turned on to correct this just press DND Button on ...